Polyglass

Karnak - 66 Modified Bitumen Adhesive (Brush or Trowel Grade)

Karnak - 66 Modified Bitumen Adhesive (Brush or Trowel Grade)

Regular price $52.95 USD
Regular price Sale price $52.95 USD
Sale Sold out

DELIVERY AND PICK UP INSTRUCTIONS

Make pickup and delievery options clear and concise here.

66 Modified Bitumen Adhesive is a bituminous based adhesive sealant designed for the application and repair of SBS modified bitumen single-ply membranes and bituminous single-ply membranes. When properly utilized this product adheres the membrane and seals the laps to prevent water intrusion.

AVAILABLE SIZES
  • 55 gallon drums
  • 5 gallon pails
  • 3 gallon buckets
  • 30 oz. caulk tubes
ADVANTAGES
  • Easy to apply
  • Eliminates the need for torches and kettles
  • Excellent cure
  • Tough, flexible, adhesive and cohesive film
  • Excellent water and weather resistance
  • Excellent general adhesive sealant
  • Excellent lap cement
  • Good U.V. resistance
  • Complies with current VOC regulations
  • Elastomeric, moves with substrate.
ADVANTAGES
  • Easy to apply
  • Eliminates the need for torches and kettles
  • Excellent cure
  • Tough, flexible, adhesive and cohesive film
  • Excellent water and weather resistance
  • Excellent general adhesive sealant
  • Excellent lap cement
  • Good U.V. resistance
  • Complies with current VOC regulations
  • Elastomeric, moves with substrate.
SPECIFICATIONS
  • VOC Content: 250 g/L MAX
  • ASTM D3019 Type III
USES

66 Modified Bitumen Adhesive Brush-Grade is used to adhere and repair SBS modified bitumen single-ply membranes, base and ply sheets, and bituminous single-ply membranes. 66 Modified Bitumen Adhesive Trowel-Grade can be used to seal and make repairs on existing modified applications and flashings on vertical surfaces, i.e. skylights, vents and pipes.

PHYSICAL PROPERTIES
  • Weight per Gallon: 8.48 lbs. (Brush) 8.87 lbs. (Trowel)
  • Solids by Weight: 74% Nominal (Brush) 81% Nominal (Trowel)
  • Solids by Volume: 69% Nominal (Brush) 78% Nominal (Trowel)
  • Color: Black
  • Shear Strength: 18 lbs./sq. in.
  • Peel Strength: 10 lbs./sq. in.
  • Elongation: 200%
  • Recovery: 80%
  • Application Temp.: 40°F to 120°F
  • Set Time: 24-48 hours at 77°F and 50% relative humidity
  • Full System Cure: Approximately 30 days
  • Service Temp(Cured Film): -15°F to 180°F
PREPARATION & APPLICATION
SURFACE PREPARATIONS:

All surfaces should be free from oil, grease, dirt and loose materials. All BUR surfaces should be patched and repaired with 19 Ultra Rubberized Flashing Cement and 31 Glass Membrane. Metal surfaces must have all rust and scales removed. Recommended application temperature is 40°F to 120°F. If applying at temperatures lower than 40°F, the substrate must be free of moisture and/or ice crystals.

APPLICATION:
Apply 66 Modified Bitumen Adhesive Brush Grade on Horizontal surfaces at a rate of approximately 1-2 gallons per 100 square feet; irregular surfaces may require slightly more material. Do not apply adhesive directly to decking or sheathing. On Vertical surfaces apply 66 Modified Bitumen Adhesive Trowel Grade at 1/8” thickness (approx. 8 gallons per 100 sq. feet.). 66 Modified Bitumen Adhesive may be applied by serrated squeegee, roller, brush or trowel. Application of one or multiple layer(s), allow a minimum of 15-20 minutes open air time before applying Cap Sheet or before each layer. Do not exceed 2 layers when installing with adhesive. Cover all air intakes during application and while drying. Application thickness, temperature, and number of membranes dictate how long it will take for the product to fully dry. Please consult membrane manufacturer for specific information and installation regarding their product.

COVERAGE RATE:
Apply 66 Modified Bitumen Adhesive Brush Grade at the rate of 1 to 2 gallons per 100 sq. ft. On porous or irregular surfaces, 2 gallons per 100 sq. ft. may be required. 66 Modified Bitumen Adhesive Trowel Grade should be applied at 1/8” thickness (approx. 8 gallons per 100 sq. feet.)

CAUTION / CARE OF TOOLS
Do not use near open flame. Material is for building exterior applications only. Avoid breathing solvent fumes and prolonged contact with skin. Excessive application may create blistering. Application at temperatures below 40°F may take longer to cure. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Insure that proper ventilation is maintained during application and drying to prevent solvent fumes from entering the building. Exterior use only.
  • Pick Up
  • Delivery
  • Warranty

SKU:

View full details
  • FAST & RELIABLE DELIVERY

    RS Supply Inc ensures quick and dependable delivery of roofing materials. Our efficient order processing and logistics mean you get what you need promptly, keeping your projects on track with top-quality supplies.

  • LARGE INVENTORY

    Explore our vast inventory at RS Supply Inc, featuring a comprehensive range of roofing materials for all project types. Our one-stop-shop approach saves you time and hassle, catering to all your roofing needs under one roof.

  • GREAT SERVICE

    Experience exceptional service at RS Supply Inc, where our expert team is always ready to assist. We prioritize customer satisfaction, offering personalized advice and support to ensure your roofing project's success.

1 of 2

Contact form